How Do You Light a Propane Fireplace? 

Using a propane fireplace can be relatively easy if you know the right steps. Often the controls are located at the base of the fireplace. However, some models require a key to open the base. In addition, some wall units have hidden valves inside the mantle. 

(Searching in Google “gas fireplace repair cost“? Contact us to know more!)

To start a fire in a propane fireplace, you will first need to light the pilot light. To do this, you will need a long lighter or a match. Then, you will want to hold down the control knob for about 30 seconds. This is to ensure that the flame is lit and will stay lit. 

If you are unable to light the pilot light, you can always contact the propane dealer or the local fire department. Alternatively, you can turn off the gas feed and manually light the pilot every time you use the fireplace. This will keep the pilot light burning through the winter. 

Typically, the best way to light a propane fireplace is to use a long lighter. Once you have the lighter in your hand, you will want to push the flame up to about one inch from the element. You will then want to slowly disengage the control knob to complete the lighting process. 

The main control knob is usually round with a wide flat surface. The knob will have words like “On,” “Off,” and “Pilot” on it. You will want to line up the “Pilot” mark on the knob with the “On” mark. After you have lined the two up, you will want to slowly hold the control knob down. This will help the thermocouple heat up and make the pilot light work. 

If you are unsure about how to light a propane fireplace, you should consult the user manual for your model. This will help you with safety instructions and information on the different controls. You will also need to wear a pair of heat-resistant gloves. If you don’t have a manual, you may need to ask a friend or family member to help you. You can find a fireplace key at most home improvement stores. 

For some gas fireplaces, there is an emergency gas valve that can be used to shut off the main gas line. This is a safety feature that is usually attached to the gas line. If you are unable to open the valve, you will need to call a gas supplier or the local fire department. 

To light a propane fireplace, you will need to use the control knob that is located near the burner. This control knob is normally labeled with the words “On,” “Off,” and “Pilot.” When you are using the control knob, you should always be in the “pilot” position. This is because this position will allow the propane to flow into the element. You can either light the pilot with a stick lighter or the built-in lighter. You will need to hold the control knob down for about 30 seconds to get the pilot to light.