How to Fix an Old Electric Fireplace Heater?
When it’s cold outside, there’s nothing like sitting in front of a warm, cozy fire to take the chill off. That’s why electric fireplace heaters are popular and increasingly affordable. However, they can also come with a few problems that require troubleshooting or repair before you can use them.
(Looking for “fireplace installers near me“? Contact us Today!)
First, check your power outlet to ensure that there are no issues. If you can’t see any signs of damage, you may be able to fix your electric fireplace with a few simple repairs.
Next, look at your fuse box and breaker to see if they’re working properly. If your unit’s fuses are burned out, this could be the cause of your problem. If not, you can replace the fuses with new ones that are more durable.
Another possible culprit is a loose connection or wiring issue. This can prevent the fireplace from turning on or from heating properly. It can also prevent the logs from setting and glowing. You should first turn off your electric fireplace and unplug it to test this.
If you can still see the flames, check your control settings to make sure they are set correctly. Most models have a remote control that you can use to adjust these settings, or you can manually tune your electric fireplace by using the controls on the back of your unit.
Finally, you might want to check your thermostat to make sure that it’s in the right mode. Many electric fireplaces come with a thermostat that can help keep your room at a comfortable temperature. If your thermostat is set below room temperature, your electric fireplace might not start. You can try raising the thermostat dial-up a few degrees to see if that helps.
Sometimes, electric fireplaces can get clogged with dust and debris over time. If this is the case, you can try to clear it up by changing your air filter or cleaning out the inlet or outlet.
You can also consider having a professional technician inspect the electric fireplace to determine what’s causing the problem and what needs to be repaired or replaced. This is a good idea especially if you aren’t sure of your electrical skills or if you don’t think you have the time to take on a project this complicated.
One of the most common electric fireplace problems is a motor that won’t turn on. This is usually caused by a fuse that’s burned out or a circuit breaker that tripped.
The circuit breaker will likely need to be reset to allow the motor to work again. You can do this with a screwdriver, but you should be careful not to damage the circuit board or other components in your fireplace.
In addition, your furnace or heat pump might need to be cleaned or replaced if it’s clogged. If your system has a filter, you should change it once a month or so to make sure that it’s working properly.
Depending on your electric fireplace model, you might be able to find some information on your own online that will help you diagnose the problem. Alternatively, you can ask the manufacturer for assistance.