How to Light a Gas Fireplace With Electronic Ignition?
There are many different types of gas fireplaces available on the market. Some use electronic ignition systems, while others are controlled by key or a remote. Regardless of the type of fireplace you have, it is important to be familiar with all the details. Mishandling your gas fireplace can be disastrous. If you are unsure of how to light a gas fireplace, consult your owner’s manual. This will save you from embarrassment and ensure that your fire is always safe and efficient.
(Searching in Google “Gas Fireplace Repair“? Contact us today!)
A modern gas fireplace has a specialized control panel. This control may be found near the bottom of the fireplace or behind the front screen. In either case, you can often access the controls with the front screen in place.
When lighting a gas fireplace, you should be aware that it is important to remember the “high/low” switch. Many fireplaces have a built-in emergency gas shut-off valve. These valves are typically positioned perpendicular to the gas line. It is essential that you turn the knob or lever in the appropriate direction, and that you hold it there for a few seconds before turning it again. Otherwise, you may end up releasing too much gas or causing an overflow.
You will probably notice a small red igniter pilot knob. Unlike traditional fireboxes, these modern gas fireplaces will usually have a lighted pilot. However, if you cannot see the pilot, you should check the manual for your specific model. For example, if the fireplace is a new model, you will likely have to consult the owner’s manual before starting the process.
The wall switch is also an important part of your gas fireplace. Usually, this is located nearby the fireplace. It is a great way to easily adjust the height of the flame. As you make adjustments, the dial or button will be depressed, and you will hear a clicking sound. That’s because the system is working to spark the gas. Generally, you’ll want to hold this knob for at least a couple of seconds to ensure that the pilot stays lit.
There are many reasons to know how to light a gas fireplace, and this will help you enjoy your fire more safely and efficiently. In particular, if you are living in an area where the weather is cold, you’ll appreciate the warm glow of a roaring fire.
Although some modern gas fireplaces are equipped with an electronic ignition, it is still recommended that you turn on your gas supply manually. While this will make your home safer, it does come with its own set of risks. First, you will need to be sure that the gas you are using is not contaminated. Second, it is best to have the key ready in a handy place, so you can get it turned on when you need it.
Lastly, you can use a long lighter to light the pilot. Just be sure to follow all safety instructions and check the manual to avoid a hefty fine.