How to Light a Pilot Light on a Gas Fireplace?

Trying to light a pilot light on a gas fireplace can be tricky. Luckily, there are a few tips you can follow that will help you get started. 

(Searching in Google “fireplace technician near me“? Contact us today!)

First, you should check to make sure the fireplace is in good working order. You should also check for a spark when you press the ignition button. If there is no spark, you will need to try another method of lighting the pilot. 

To light the pilot, you will need a long, stem lighter. You will also need to hold the lighter near the pilot burner and hold the control knob in a downward position. You should hold the lighter in place for about 20 seconds to allow the thermocouple to heat up. Once the thermocouple is hot, you can release the control knob, and the pilot burner should be lit. 

If the pilot light does not light, it may be a problem with the thermocouple. You can try replacing the thermocouple or try a different method of lighting the pilot. If it still does not light, you may need to call a service technician for help. You can search for a professional through sites like Home Advisor or Angie’s List. 

The other way to light the pilot on a gas fireplace is by using an ignition switch. Typically, this is a red button or switch near the control knob. In some models, you will need to press the button a few times until the pilot light starts to burn. In other models, you may need to use a lit match to ignite the pilot. 

Using a long, stem lighter to light the pilot is the easiest way to do it. A piezoelectric spark mechanism is another option. You should be able to see a spark if the lighter is inserted near the pilot. When the pilot light is lit, you can hold the lighter in the vicinity of the termination hood on the pilot and release the control knob, allowing the flame to flow. If you are using a long-stem lighter, you will need to be quick about moving the lighter to the pilot. 

You may need to use heat-resistant gloves while you are lighting the pilot. You may also want to check the manual for specific instructions on how to light the pilot on a gas fireplace. In most cases, you should hold the control knob for at least 15 seconds. This will ensure that the pilot stays lit. 

While you are holding the control knob in a downward position, you should also hold the gas dial in a downward position. This is a safety device, and it will ensure that you don’t accidentally light a fire with the pilot still on. If you notice any gas leaking from the pilot, you should immediately turn off the gas supply and contact a professional. 

Using the right technique is the best way to ensure that you get the pilot light to light. Using a long, stem lighter to ignite the pilot will keep the pilot burning for a long time. You should also be sure to hold the control knob down for at least 30 seconds. It may take a few seconds for the thermocouple to warm up, but once it does, the pilot should light and stay lit.