How to Light a Propane Fireplace Without Igniter?
If you have a propane fireplace, you may have trouble lighting it. This can be dangerous since it can lead to a fire. Fortunately, there are a few things you can do to ensure that your fireplace is working properly.
(Searching in Google “repair gas fireplace near me“? Contact us today!)
Before lighting a propane fireplace, you should first make sure that the main gas supply is turned on. This can be done with a key, which should be kept close to the fireplace. You can also call your propane dealer or the fire department to make sure that the gas is not leaking out of your home.
Next, you will want to check the thermocouple to see if it is functioning correctly. If it is not, you should use a compressed air tool to clear the area between the ignitor and the thermocouple. You can get one of these at your local hardware store.
After you have checked your thermocouple, you should make sure that the control knob is in the pilot position. If it is not, you can manually light your fireplace.
Once you are in the pilot position, you should hold the knob in that position for at least five seconds. After that, you should turn the knob to the “on” position. Depending on your model, you might need to leave the light on for a certain amount of time.
If your fireplace is equipped with a safety pilot control valve, this step is unnecessary. This type of valve allows you to easily relight your fireplace. If your fireplace has this feature, follow the instructions in your owner’s manual for the proper operation of the device.
The main reason that the pilot light on your fireplace may not be working is that you have ran out of propane. If this is the case, you can try using a long lighter to ignite the flame. You should use caution and wear heat resistant gloves. If the light still does not come on, you should contact your gas provider or propane dealer.
When you have found a way to relight your pilot, you will want to keep an eye on the flame to make sure it stays lit. If it does not, you should repeat the process. You should also be careful when replacing the glass shield. If your pilot light goes out more than once a year, you should have it inspected by a service technician.
Finally, you should make sure that the flame is going off in the proper direction. If you can’t, you may have a bad valve. If you do, you might need to replace it. You should also inspect the pilot for signs of damage or obstruction. The burner plate can become clogged with carbon residue.
If you are unable to relight your pilot, you may have a broken ignitor. You can purchase a replacement at your local hardware store or you can have it repaired. Some areas don’t allow you to light a fireplace if your ignitor is broken.