How to Light Gas Fireplace Pilot Without Ignitor?
Gas fireplaces are a popular way to heat your home during the winter. They are also a great way to reduce your energy bills because they only use a small amount of fuel for their pilot light. However, they do require a little extra effort to run correctly. If you have a gas fireplace, here are some steps to help you keep it running safely and efficiently:
(Looking for “gas fireplace pricing“? Contact us Today!)
Check for a Breaker Tripped Circuit or Piezo Not Working
First, make sure there’s no breaker tripping in your home that might be affecting your fireplace’s operation. If there is, reset it to its normal position and check the ignitor switch per your owner’s manual instructions. If the switch is tripped, it may be a good idea to call an electrician or a service professional for advice on how to fix the problem.
Relight Your Pilot
If the ignitor is not functioning properly, try to relight it by using one of the following methods:
Ignition Method Without The Ignitor
Many modern gas fireplaces come with an ignition button or a piezo that can be used to ignite the pilot light. You can usually find this on the control dial of your fireplace, or if you’re using a traditional type of gas valve, on the handle. Once you find it, press the button once every second until it lights.
This might take several attempts, so give it a little time. If it still doesn’t light, move on to the next step.
Relight Your Pilot With A Long Match or Butane Lighter
Some gas fireplaces have a pilot light assembly that you can access by removing the cover of the firebox or by lifting the front of the fireplace. You can then reach down and light the pilot light with a long match or butane lighter. Once the pilot light has been lit, you can then turn on the main burner to begin burning your fire.
The pilot light is the light that shines down into the bottom of the fireplace, and it’s a safety feature for your gas fireplace. If the pilot light isn’t lit, it could open your gas valve, allowing natural gas to leak into your home and cause serious damage.
Once you’ve lit the pilot, you can then use your gas valve to adjust the height of the flame and to turn it on and off. Then, you can enjoy a cozy evening by your gas fireplace!
Ignition Method Using a Key
Some fireplaces have keys that you can press to start your fire. These keys are generally stored near your fireplace, but some have them permanently installed in the wall. If you can’t find the key, contact your fireplace’s manufacturer to find out what kind of key it uses.
If the key does not work, you can usually purchase a replacement at most home improvement stores. Alternatively, you can contact a locksmith or a fireplace specialist to help you get it working again.