How to Light Pilot on Gas Fireplace?
If your gas fireplace’s pilot light has gone out, you may need to re-light it. To do this, turn on the gas supply and hold down the control knob for thirty seconds or so. Depending on your model, this procedure may vary. Here are a few tips to help you get started.
(Searching in Google “fireplace repair near me“? Contact us today!)
Re-lighting a pilot light on a modern gas fireplace
Re-lighting a pilot light on modern gas fireplaces can be a bit confusing. First, you need to find the igniter buttons. These are small red buttons located near the main control knob. These buttons are labeled “Off” or “On.” Once you’ve found them, hold them down. This will light the pilot and warm up the thermocouple that prevents gas flow when the pilot is out.
Modern gas fireplaces have a specialized control panel that controls the pilot light. The panel is usually behind the fireplace’s front screen. First, remove the front screen to access the control panel. Next, locate the gas valve knob. It should be marked “Pilot,” and the words “On” and “Off” should appear on the knob. Then, turn it to the “OFF” position. You should wait about 5 minutes before turning it back on.
Turning on the gas supply
When turning on the gas supply to relight the pilot on a gas fireplace, you should always turn off the gas supply first, as residual gas can cause the new flame to not burn properly. Also, open windows if possible to increase ventilation. If you’re having trouble starting the pilot, call a professional to inspect the system.
If you have a new gas fireplace, you may want to read the manual that came with your unit. The manual should tell you how long you should wait before you light the pilot. Older models may require several presses of the ignition button before the pilot will ignite properly.
Holding the control knob down for at least 30 seconds
Holding the control knob down for at least thirty seconds is important to ensure that the pilot light remains lit. You should notice a dark purple-blue flame and the ignite button indicator light should turn red. If the pilot light goes out, you should repeat the procedure.
Once the pilot is lit, you can adjust the flame with a remote control or wall switch. Holding down the control knob for at least thirty seconds will ensure that the standing pilot light remains lit. A few minutes may pass before the flame stays lit.
Depending on the type of pilot light you have
Modern gas fireplaces feature a standing pilot light controlled by a special control panel located behind the front screen. To access the control panel, remove the front screen. Locate the gas valve, which is usually marked with the words “Pilot” or “On/Off”. Turn the knob to the “Pilot” position. Wait for at least 5 minutes for gas fumes to disperse before turning on the fireplace.
A pilot light allows for the gas to flow more easily. By allowing a small amount of gas to flow through the pilot, it keeps the inside of the firebox dry, which prevents spider webs and other debris from blocking the pipes. However, if you’re unsure of how to light pilot on gas fireplace, it’s best to call a professional who can inspect the fireplace to make sure that it is working properly.