How to Maintenance a Gas Fireplace?

When cleaning your gas fireplace, be sure to use an ammonia-free glass cleaner. You can also use a solution of equal parts of vinegar and water. Avoid soap, as this could leave residue behind on the glass. Ammonia can react with the heat of your gas fireplace, which would ruin the look of the glass. 

(Looking for gas log fireplace maintenance? Contact us today!)

Cleaning the exterior 

Cleaning the exterior of a gas fireplace requires a little bit of care and attention. First, make sure to turn off the gas valve and remove the pilot light. You can also use a soft paintbrush to remove debris and dust. Once the components are clean, reassemble the fireplace and turn it back on. Then, remember to clean the external vent monthly. 

Inspecting the chimney 

Inspecting the chimney is an important step in maintaining a gas fireplace. The technician will check the chimney for obstructions and combustible deposits such as creosote. If they are not removed, the deposits can damage the flue tiles. 

Cleaning the doors 

If you own a gas fireplace, you should regularly clean the doors with a soft cloth. The smoke and fumes in the fireplace will cause the glass to become cloudy and dirty, so regular cleaning is vital for protecting the glass from permanent damage. You can clean the glass with a fireplace glass cleaner that is available at a hardware store. If you prefer a non-abrasive solution, you can also clean the glass by using a solution of equal parts vinegar and water. Avoid using soap or ammonia-based oven cleaner on the glass. A soft cloth is best for removing the glass film. 

Cleaning the glass stones 

Cleaning the glass stones of a gas fireplace requires the use of a vacuum hose attachment to get rid of any debris. Then, use a water or vinegar solution to clean the glass. Avoid using regular cleaners, as these can leave residue on the glass and may stain it when heated. If you prefer to use a cloth, use an old one that’s been dipped in warm soapy water. 

Inspecting the venting system 

Inspecting the venting system of a gas fireplace is a key part of fireplace maintenance. It should be cleaned and inspected once a year to ensure that it is free of any debris. Proper venting can prevent fires from arising. Proper cleaning can also prevent the buildup of debris. To inspect the venting system of a gas fireplace, turn off the gas and open the flue. 

Checking the batteries 

Checking the batteries in your carbon monoxide detector is an essential part of maintaining a gas fireplace. This device can help save your life if it detects a leak in carbon monoxide. The device is not included with your gas fireplace but it’s recommended to install one. It should be placed a few feet away from the fireplace and positioned about four or five feet above the floor.