Paint a Brick Fireplace White 

Whether you’re painting a brick fireplace for the first time or replacing a stained or broken one, there are several steps to consider before you start. For starters, you’ll need a few painter’s tools. For example, a roller designed for textured surfaces is a must-have. Also, a telescopic roller extension pole is a useful tool for reaching hard-to-reach areas. 

(Searching in Google “fireplace ideas“? Contact us today!)

Using a paint sprayer is also recommended. A good paint sprayer can help you get into all the nooks and crannies of a brick fireplace. The high temperature of the spray won’t stick to a dirty surface, and the high-quality paint can help prevent toxic fumes. 

You can also use a non-abrasive all-purpose cleaner to clean your fireplace. If you have a masonry cleaner, be sure to read the label carefully and take the proper precautions. Typically, masonry cleaners are acid-based, which could damage your paint. 

While you’re at it, be sure to mask off areas you don’t want painted. You’ll need to protect the walls, mantle, and floor. For this, you can use blue painters tape or Frog Tape. The latter can be found in nearly any paint store. 

You’ll also need a tarp or drop cloth. A tarp is especially helpful for painting brick, as it can shield the brick from the elements while you’re at it. If you don’t have a tarp, you can use a plastic wrap to hold your brushes and other tools in place. 

You should also use a small wire brush to scrub off loose dirt from the surface. You can use a commercial cleaner, too, if you like. While you’re at it, you might want to consider a shop vac to clean the whole thing up. 

There’s nothing quite as satisfying as a freshly-painted fireplace, and it’s a lot easier than you might think. It’s also a great way to brighten a room. When you’re considering how to paint a brick fireplace, remember that a lighter color will blend better with the natural texture of the brick. But be sure to wait until the fireplace has cooled down before painting. 

Another important part of how to paint a brick fireplace is the prep work. You’ll need to clean the brick and remove any loose dirt. You can use white vinegar and water to do this. However, you’ll also want to get a high-quality acrylic latex primer. This is especially important if you’re painting a brick fireplace in an older home that was painted with oil-based paint. The primer will help minimize the number of coats you’ll need. 

While you’re at it, you’ll also need to apply a good sealer. This is an obvious step, but it’s worth the effort. Generally speaking, you should apply two coats of sealer, and wait about 24 hours between coats. If you’re worried that the paint will peel, you can try a coat of stain-blocking oil-based primer. 

If you’re going to do the actual painting, you’ll need a few more supplies. For example, you’ll need a small bucket of soap and water, as well as a tarp or drop cloth to protect the floor.