How to Repair an Old-Fashioned Electric Fireplace Heater?

If you are the owner of an old-fashioned electric fireplace heater, you may be wondering how to repair the unit. Depending on the model, you may need to open the unit to access the internal components. This is necessary to diagnose any problems. However, some manufacturers recommend that you avoid doing it yourself. Instead, you should contact the manufacturer of the unit for replacement parts. 

(Searching in Google ““? Contact us today!)

First, you should unplug the fireplace. You should also move the fireplace away from electrical power sources. Make sure that it is not near children and pets, and keep blankets or toys at a safe distance. 

Next, you should take out the access cover and remove the old light bulbs. You should use rubber gloves for this. Otherwise, you can damage the glass or weaken the bulb. 

Ensure that the leads from the circuit board are free from breaks. Also, the fuse box should have accurate labels. In the event that you need to replace the fuses, you will need to find a fuse that can handle the power provided by the fireplace. 

To fix the electric fireplace flame, you will need to remove the access cover and then replace the old bulbs with new ones. Be sure to install the bulbs in a clockwise manner. 

You can also spray WD40 onto the motor of the flame to provide lubrication. This will help to fix a squeaking effect. It is important to note that you should not use WD40 on other parts of the unit. The lubrication will not only damage the rod, but it can also damage other parts of the unit. 

After you have replaced the bulb and re-installed the access panel, check the connections to the other components. You can check the flame settings to see if the flame is working correctly. 

If you are unable to determine the cause of the problem, you may need to remove the unit and call the manufacturer to get a replacement. If this is not an option, you can try repairing the electric fireplace yourself. When doing this, make sure that you have all the tools you need at hand. For example, if you need to unscrew the back of the unit, you should have a screwdriver and a multimeter. 

While you are at it, check for frayed wiring. You should also check for discoloration around the connections. If you do need to open up the unit, be sure to isolate the fireplace from the power source, as there is a risk of electrocution from a live wire. 

Lastly, test the outlet. You should be able to turn the fireplace on and off, though the flames will not be visible. Plug the fireplace into another outlet to test the outlet. Check to ensure that it reads 110-120 volts. 

As you can see, electric fireplaces can be a great way to add ambiance to your home. But, they can also develop faults, especially over time. Some of these faults can be simple to diagnose, while others require more extensive work.