How to Turn on a Gas Fireplace With Wall Key?

Depending on the type of fireplace you have, you will either have a key to start your fireplace or a control panel to adjust the flames. You’ll also need to know where to find the key or control panel. Some models will have a key that’s permanently placed in the wall, and others are operated by a remote. 

(Searching in Google “propane fireplace repair near me“? Contact us today!)

If you have a gas fireplace with a wall key, you’ll need to know how to turn on the gas fireplace with the key. It’s not as complicated as it sounds. You’ll need to first open the chimney vent. After that, you’ll need to remove the cover from your fireplace, and then you’ll need to access the burner. 

The wall key can be a bit tricky to figure out. It’s usually shaped like a metal pole, and it will need to be turned into the keyhole to adjust the flame height. The key should be kept near the fireplace, so you can use it when you need it. In some cases, you’ll need a friend to help you turn the key. You might also need a long lighter. The lighter can be placed next to the pilot burner. 

The best way to turn on a gas fireplace with the key is to first open the chimney vent. If you have a remote control, the key will not work. However, you can still turn the key to the off position. This will prevent any gas fumes from escaping. You can also place a lighted match stick in the middle of your fireplace to light the pilot light. 

The other obvious way to turn on a gas fireplace with a key is to turn on the gas valve. This is typically found at the bottom of the fireplace, but it can be anywhere you like. It’s best to be patient and wait at least 5 minutes before you start your fireplace. This will allow the gas to dissipate, and also ensure you’ll be able to start the fire. 

The gas fireplace key may be found on the fireplace apron, in a nearby cabinet, or on a nearby shelf. The key itself is a metal keyhole, which means it’s a good idea to keep it in a secure place. You might have to wiggle the key into the slot, but you’ll know when you have it in place. 

The key’s square end should fit in the keyhole, and you’ll need to turn the key to the off position before you can turn it on. You should also keep the key somewhere safe, in case you need it later. If you forget to turn the key on, the gas valve will not supply gas to your fireplace, and you’ll have to shut off the gas to keep it from exploding. If you don’t have a key, you may have to take your fireplace apart and manually light the pilot light. 

The gas fireplace key’s name is a bit of a mouthful, but the key’s real function is the control of the flow of gas. You can get a sense of the function by turning the key a couple of times. It’s not a great idea to turn the key too far left or right, because you may release too much gas or too little gas. You should also be sure to close the valve fully to avoid wasting gas.